Archive | Ağustos, 2019

Qmmp Music Player 0.12.4 ve Qmmp Music Player 1.3.4 Duyuruldu

Açık kaynak kodlu, Winamp benzeri, popüler bir multimedya oynatıcı olan Qmmp‘ın 0.12.4 ve 1.3.4 sürümleri duyuruldu. Çeşitli kararlılık iyileştirmeleri ile gelen 0.12.4 ve 1.3.4 sürümlerinin önemli özellikler içerdiği belirtiliyor. Basit, hızlı ve özelleştirilebilir bir uygulama olan Qmmp; tamamen Türkçe destekli bir yazılım. Klasik bir Winamp tarzı görünüm ile gelen yazılım, Winamp ve XMMS arayüzlerini kullanabiliyor. Giriş, çıkış, görsellik, efektler ve genel olmak üzere 5 ana kısma ayrılmış olan eklentiler, oldukça kullanışlı. QMMP’in tercih edilmesinde en önemli etkenlerden biri de, sistemde kurulu olan bütün çoklu ortam eklentilerini ve kütüphanelerini kullanabiliyor olmasıdır. Qmmp 0.12.4 ve 1.3.4 hakkında ayrıntılı bilgi edinmek için değişiklikler sayfasını inceleyebilirsiniz.

Continue Reading →

Qmmp 0.12.4 ve 1.3.4 edinmek için aşağıdaki linkten yararlanabilirsiniz.

0

Wine 4.15 duyuruldu

Wine’in 4.15 sürümü duyuruldu. Wine ekibinin, Wine 4.15 geliştirme sürümü duyurmaktan gurur duyduğunu söyleyen Julliard; Passport HTTP yönlendirmeleri için destek eklenen yeni sürümde, çeşitli hata düzeltmeleri dışında bir sürü güncelleme olduğunu ifade ediyor. Vulkan desteği, Direct3D 12 desteği, Android’de yüksek DPI desteği sunulduğunu hatırlatan Julliard; ayrıca, oyun kontrolörlerinin desteklendiğini söyledi. Daha fazla DLL dosyasının varsayılan olarak PE dosyaları olarak inşa edildiğini söyleyen Julliard; tak ve kullan aygıt sürücüleri için destek sağlandığını hatırlattı. Görüntüleme cihazlarının numaralandırılması için daha fazla destek de sağlanmış bulunuyor. Wine 4.15 hakkında daha ayrıntılı bilgi edinmek için sürüm duyurusunu inceleyebilirsiniz.

Continue Reading →

Wine 4.15 edinmek için aşağıdaki linklerden yararlanabilirsiniz.

0

Full Circle Magazine Weekly News 148 duyuruldu

Created with GIMP

Ubuntu Linux topluluğu tarafından çıkarılan özgür ve bağımsız bir dergi olan Full Circle Magazine‘in Weekly News 148. sayısı duyuruldu. Yeni sayı; Python seri terminal sunucusu, Trident projesi, Ubuntu yardım, inceleme: FeatherPad, Ubuntu oyunları, haberler, günlük soru-cevap, bulmaca ve daha fazlasını içeriyor. Full Circle Magazine Weekly News 148 içeriğine ilişkin olarak buradan yararlanabilirsiniz. Ubuntu Linux dağıtımına adanmış özgür, bağımsız, aylık bir PDF dergisi olarak yayımlanan Full Circle Magazine, Trident projesi ile geri dönüyor. Full Circle Magazine 148 içeriğine ilişkin olarak buradan yararlanabilirsiniz.

Continue Reading →

Full Circle Magazine Weekly News 148 edinmek için aşağıdaki linklerden yararlanabilirsiniz.

0

PyCharm 2019.2.2 Preview duyuruldu

PyCharm’ın PyCharm 2019.2.2 Preview sürümü, Joaquin Treviño tarafından duyuruldu. Treviño; Python 3.8 için bazı kod düzeltmeleri uygulandığını söylediği sürümün, re modülüne unicode karakter desteği eklendiğini ifade etti. Python konsolunda bir hatanın giderildiğini belirten Treviño; Jupyter notebooklarda bazı düzeltmeler yapıldığını söyledi. IPython için hata ayıklayıcının düzgün çalışmamasına neden olan bazı sorunların çözüldüğünü söyleyen Treviño; daha fazla bilgi için sürüm notlarının incelenebileceğini ifade etti. Bunun bir test sürümü olduğunun unutulmaması ve yalnızca test etmek amacıyla kullanılması gerektiği hatırlatılırken, test eden kullanıcıların tespit ettikleri hataları rapor etmeleri rica ediliyor. PyCharm 2019.2.2 Preview hakkında ayrıntılı bilgi edinmek için sürüm duyurusunu inceleyebilirsiniz.

Continue Reading →

PyCharm 2019.2.2 Preview edinmek için aşağıdaki linkten yararlanabilirsiniz.

0

Calamares 3.2.13 duyuruldu

Bağımsız bir sistem kurulumcusu olan Calamares’in 3.2.13 sürümü duyuruldu. Calamares ekibinin Calamares’in yeni sürümü 3.2.13’ü duyurmaktan mutluluk duyduğu ifade edilirken, Calamares’in hem manuel hem de otomatik bölümleme işlemleri için gelişmiş bir bölümleme özelliğine sahip olduğu hatırlatıldı. Özelleştirilebilir olarak tasarlanan yazılım, bilindiği gibi Manjaro Linux için geliştirilen ve grafik bir arayüz ile sunulan yeni sistem yükleyicisidir. Manjaro Linux’un hızlı ve kolay bir biçimde kurulabilmesi için geliştirilmiştir. Qt tabanlı bir yazılım olan Calamares, Manjaro Türkiye ekibi tarafından tamamen Türkçeye çevirilmiş bulunuyor. Calamares 3.2.13 hakkında ayrıntılı bilgi edinmek için sürüm duyurusunu inceleyebilirsiniz.

Continue Reading →

Yalnızca Manjaro Linux için değil, tüm dağıtımlar için bir kurulum aracı olarak düşünülen Calamares ile ilgili ilk fikir Mayıs 2014’te çıkmış ortaya. Blue Systems’in desteği ile Haziran 2014’te sıfırdan başlayan süreç; KaOS, Manjaro, Maui ve Netrunner geliştiricilericilerinin değerli katkılarıyla bugünlere gelmiş. Sürece sonradan, Fedora, BBQLinux, OpenMandriva ve KDE Visual Design Group katılmış. Hem DOS hem de GPT bölüm tablosuna destek veren Calamares; otomasyon ve yeniden boyutlandırma işlevselliğine sahip bulunuyor. Calamares 3.2.13 edinmek için aşağıdaki linkten yararlanabilirsiniz.

0

Snapd 2.41 duyuruldu

GNU/Linux sistemler için geliştirilmiş daha hızlı kurulum,uygulamaların daha güvenli çalışması,güncellemeler gibi işlemlerin yapildığı paket yoneticisi olan Snapd’nin 2.41 sürümü, Michael Vogt tarafından duyuruldu. Snapd 2.41 sürümünü kullanıma sunmaktan mutluluk duyduklarını söyleyen Vogt; bunun Gadget varlık güncellemeleri içerdiğini söyledi. Daemon kullanıcı desteği ile gelen sürüm, çeşitli iyileştirmeler getiriyor. Ubuntu’da yıllardır uygulama yüklemek, yükseltmek ve kaldırmak için kullanılan “apt-get” komutu yerine, Ubuntu 16.04 sürümüyle birlikte kullanıma sunulan Snap paketleme sistemi, “.deb” paketleri yerine, “.snap” paketlerini kullanıyor. Böylelikle hem masaüstü bilgisayarın, hem de Ubuntu telefon veya tabletlerin ortak yazılım kullanabilmesi amacı güdülüyor. Ayrıca snap, paket bağımlılığı sorununu ortadan kaldıracak. Yani uygulamalar, sistem sürümünden bağımsız olarak çalışacak. Bir uygulama indirildiğinde, aslında o uygulamanın çalışması için gerekli paket bağımlılıkları da indirilmiş olacak. Uygulamaların tamamen yalıtılmış olarak çalışacak olmaları, sistem geneli için daha az sorun ve daha az güvenlik açığı anlamına geliyor. Snapd 2.41 hakkında ayrıntılı bilgiyi GitHub sayfasında bulabilirsiniz.

Continue Reading →

Snapd 2.41 edinmek için aşağıdaki linkten yararlanabilirsiniz.

0

Regex tutorial for Linux (Sed & AWK) examples

In order to successfully work with the Linux sed editor and the awk command in your shell scripts, you have to understand regular expressions or in short regex. Since there are many engines for regex, we will use the shell regex and see the bash power in working with regex. First, we need to understand what regex is, then we will see how to use it. For some people, when they see the regular expressions for the first time they said what are these ASCII pukes !! Well, A regular expression or regex, in general, is a pattern of text you define that a Linux program like sed or awk uses it to filter text. We saw some of those patterns when introducing basic Linux commands and saw how the ls command uses wildcard characters to filter output.

Continue Reading →

Types of regex

There are many different applications use different types of regex in Linux, like the regex included in programming languages (Java, Perl, Python,,,) and Linux programs like (sed, awk, grep,) and many other applications.

A regex pattern uses a regular expression engine which translates those patterns.

Linux has two regular expression engines:

  • The Basic Regular Expression (BRE) engine.
  • The Extended Regular Expression (ERE) engine.

Most Linux programs work well with BRE engine specifications, but some tools like sed understand some of the BRE engine rules.

The POSIX ERE engine is shipped with some programming languages. It provides more patterns like matching digits, and words. The awk command uses the ERE engine to process its regular expression patterns.

Since there are many regex implementations, it’s difficult to write patterns that work on all engines. Hence, we will focus on the most commonly found regex and demonstrate how to use it in the sed and awk.

Define BRE Patterns

You can define a pattern to match text like this:

echo "Testing regex using sed" | sed -n '/regex/p'

echo "Testing regex using awk" | awk '/regex/{print $0}'

Linux regex tutorial

You may notice that the regex doesn’t care where the pattern occurs or how many times in the data stream.

The first rule to know is that regular expression patterns are case sensitive.

echo "Welcome to LikeGeeks" | awk '/Geeks/{print $0}'

echo "Welcome to Likegeeks" | awk '/Geeks/{print $0}'

regex character case

The first regex succeeds because the word “Geeks” exists in the upper case, while the second line fails because it uses small letters.

You can use spaces or numbers in your pattern like this:

echo "Testing regex 2 again" | awk '/regex 2/{print $0}'

space character

Special Characters

regex patterns use some special characters. And you can’t include them in your patterns and if you do so, you won’t get the expected result.

These special characters are recognized by regex:

.*[]^${}\+?|()

You need to escape these special characters using the backslash character (\).

For example, if you want to match a dollar sign ($), escape it with a backslash character like this:

cat myfile

There is 10$ on my pocket

awk '/\$/{print $0}' myfile

dollar sign

If you need to match the backslash (\) itself, you need to escape it like this:

echo "\ is a special character" | awk '/\\/{print $0}'

special character

Despite the forward slash isn’t a special character, you still get an error if you use it directly.

echo "3 / 2" | awk '///{print $0}'

regex slash

So you need to escape it like this:

echo "3 / 2" | awk '/\//{print $0}'

escape slash

Anchor Characters

To locate the beginning of a line in a text, use the caret character (^).

You can use it like this:

echo "welcome to likegeeks website" | awk '/^likegeeks/{print $0}'

echo "likegeeks website" | awk '/^likegeeks/{print $0}'

anchor begin character

The caret character (^) matches the start of text:

awk '/^this/{print $0}' myfile

caret anchor

What if you use it in the middle of the text?

echo "This ^ caret is printed as it is" | sed -n '/s ^/p'

caret character

It’s printed as it is like a normal character.

When using awk, you have to escape it like this:

echo "This ^ is a test" | awk '/s \^/{print $0}'

escape caret

This is about looking at the beginning of the text, what about looking at the end?

The dollar sign ($) checks for the end a line:

echo "Testing regex again" | awk '/again$/{print $0}'

end anchor

You can use both the caret and dollar sign on the same line like this:

cat myfile
this is a test
This is another test
And this is one more

awk '/^this is a test$/{print $0}' myfile

combine anchors

As you can see, it prints only the line that has the matching pattern only.

You can filter blank lines with the following pattern:

awk '!/^$/{print $0}' myfile

Here we introduce the negation which is done by the exclamation mark !

The pattern searches for empty lines where nothing between the beginning and the end of the line and negates that to print only the lines have text.

The dot Character

The dot character is used to match any character except newline (\n).

Look at the following example to get the idea:

cat myfile
this is a test
This is another test
And this is one more
start with this

awk '/.st/{print $0}' myfile

dot character

You can see from the result that it prints only the first two lines because they contain the st pattern while the third line does not have that pattern and fourth line start with st so that also doesn’t match our pattern.

Character Classes

You can match any character with the dot special character, but what if you match a set of characters only, you can use a character class.

The character class matches a set of characters if any of them found, the pattern matches.

The chracter classis defined using square brackets [] like this:

awk '/[oi]th/{print $0}' myfile

character classes

Here we search for any th characters that have o character or i before it.

This comes handy when you are searching for words that may contain upper or lower case and you are not sure about that.

echo "testing regex" | awk '/[Tt]esting regex/{print $0}'

echo "Testing regex" | awk '/[Tt]esting regex/{print $0}'

upper and lower case

Of course, it is not limited to characters; you can use numbers or whatever you want. You can employ it as you want as long as you got the idea.

Negating Character Classes

What about searching for a character that is not in the character class?

To achieve that, precede the character class range with a caret like this:

awk '/[^oi]th/{print $0}' myfile

negate character classes

So anything is acceptable except o and i.

Using Ranges

To specify a range of characters, you can use the (-) symbol like this:

awk '/[e-p]st/{print $0}' myfile

regex ranges

This matches all characters between e and p then followed by st as shown.

You can also use ranges for numbers:

echo "123" | awk '/[0-9][0-9][0-9]/'

echo "12a" | awk '/[0-9][0-9][0-9]/'

number range

You can use multiple and separated ranges like this:

awk '/[a-fm-z]st/{print $0}' myfile

non-continuous range

The pattern here means from a to f, and m to z must appear before the st text.

echo "abc" | awk '/[[:alpha:]]/{print $0}'

echo "abc" | awk '/[[:digit:]]/{print $0}'

echo "abc123" | awk '/[[:digit:]]/{print $0}'

special character classes

The Asterisk

The asterisk means that the character must exist zero or more times.

echo "test" | awk '/tes*t/{print $0}'

echo "tessst" | awk '/tes*t/{print $0}'

asterisk

This pattern symbol is useful for checking misspelling or language variations.

echo "I like green color" | awk '/colou*r/{print $0}'

echo "I like green colour " | awk '/colou*r/{print $0}'

asterisk example

Here in these examples whether you type it color or colour it will match, because the asterisk means if the “u” character existed many times or zero time that will match.

To match any number of any character, you can use the dot with the asterisk like this:

awk '/this.*test/{print $0}' myfile

asterisk with dot

It doesn’t matter how many words between the words “this” and “test”, any line matches, will be printed.

You can use the asterisk character with the character class.

echo "st" | awk '/s[ae]*t/{print $0}'

echo "sat" | awk '/s[ae]*t/{print $0}'

echo "set" | awk '/s[ae]*t/{print $0}'

asterisk with character classes

All three examples match because the asterisk means if you find zero times or more any “a” character or “e” print it.

Extended Regular Expressions

The following are some of the patterns that belong to Posix ERE:

The question mark

The question mark means the previous character can exist once or none.

echo "tet" | awk '/tes?t/{print $0}'

echo "test" | awk '/tes?t/{print $0}'

echo "tesst" | awk '/tes?t/{print $0}'

question mark

The question mark can be used in combination with a character class:

echo "tst" | awk '/t[ae]?st/{print $0}'

echo "test" | awk '/t[ae]?st/{print $0}'

echo "tast" | awk '/t[ae]?st/{print $0}'

echo "taest" | awk '/t[ae]?st/{print $0}'

echo "teest" | awk '/t[ae]?st/{print $0}'

question mark with character classes

If any of the character class items exists, the pattern matching passes. Otherwise, the pattern will fail.

The Plus Sign

The plus sign means that the character before the plus sign should exist one or more times, but must exist once at least.

echo "test" | awk '/te+st/{print $0}'

echo "teest" | awk '/te+st/{print $0}'

echo "tst" | awk '/te+st/{print $0}'

plus sign

If the “e” character not found, it fails.

You can use it with character classes like this:

echo "tst" | awk '/t[ae]+st/{print $0}'

echo "test" | awk '/t[ae]+st/{print $0}'

echo "teast" | awk '/t[ae]+st/{print $0}'

echo "teeast" | awk '/t[ae]+st/{print $0}'

plus sign with character classes

if any character from the character class exists, it succeeds.

Curly Braces

Curly braces enable you to specify the number of existence for a pattern, it has two formats:

n: The regex appears exactly n times.

n,m: The regex appears at least n times, but no more than m times.

echo "tst" | awk '/te{1}st/{print $0}'

echo "test" | awk '/te{1}st/{print $0}'

curly braces

In old versions of awk, you should use –re-interval option for the awk command to make it read curly braces, but in newer versions you don’t need it.

echo "tst" | awk '/te{1,2}st/{print $0}'

echo "test" | awk '/te{1,2}st/{print $0}'

echo "teest" | awk '/te{1,2}st/{print $0}'

echo "teeest" | awk '/te{1,2}st/{print $0}'

curly braces interval pattern

In this example, if the “e” character exists one or two times, it succeeds; otherwise, it fails.

You can use it with character classes like this:

echo "tst" | awk '/t[ae]{1,2}st/{print $0}'

echo "test" | awk '/t[ae]{1,2}st/{print $0}'

echo "teest" | awk '/t[ae]{1,2}st/{print $0}'

echo "teeast" | awk '/t[ae]{1,2}st/{print $0}'

interval pattern with character classes

If there are one or two instances of the letter “a” or “e” the pattern passes, otherwise, it fails.

Pipe Symbol

The pipe symbol makes a logical OR between 2 patterns. If one of the patterns exists, it succeeds, otherwise, it fails, here is an example:

echo "Testing regex" | awk '/regex|regular expressions/{print $0}'

echo "Testing regular expressions" | awk '/regex|regular expressions/{print $0}'

echo "This is something else" | awk '/regex|regular expressions/{print $0}'

pipe symbol

Don’t type any spaces between the pattern and the pipe symbol.

Grouping Expressions

You can group expressions so the regex engines will consider them one piece.

echo "Like" | awk '/Like(Geeks)?/{print $0}'

echo "LikeGeeks" | awk '/Like(Geeks)?/{print $0}'

grouping expressions

The grouping of the “Geeks” makes the regex engine treats it as one piece, so if “LikeGeeks” or the word “Like” exist, it succeeds.

Practical examples

We saw some simple demonstrations of using regular expression patterns, it’s time to put that in action, just for practicing.

Counting Directory Files

Let’s look at a bash script that counts the executable files in a folder from the PATH environment variable.

echo $PATH

To get a directory listing, you must replace each colon with space.

echo $PATH | sed 's/:/ /g'

Now let’s iterate through each directory using the for loop like this:

mypath=$(echo $PATH | sed 's/:/ /g')

for directory in $mypath; do

done

Great!!

You can get the files on each directory using the ls command and save it in a variable.

You may notice some directories doesn’t exist, no problem with this its OK.

count files

Cool!! This is the power of regex. These few lines of code count all files in all directories. Of course, there is a Linux command to do that very easy, but here we discuss how to employ regex on something you can use. You can come up with some more useful ideas.

Validating E-mail Address

There are a ton of websites that offer ready to use regex patterns for everything including e-mail, phone number, and much more, this is handy but we want to understand how it works.

[email protected]

The username can use any alphanumeric characters combined with dot, dash, plus sign, underscore.

The hostname can use any alphanumeric characters combined with a dot and underscore.

For the username, the following pattern fits all usernames:

^([a-zA-Z0-9_\-\.\+]+)@

The plus sign means one character or more must exist followed by the @ sign.

Then the hostname pattern should be like this:

([a-zA-Z0-9_\-\.]+)

There are special rules for the TLDs or Top-level domains, and they must be not less than 2 and five characters maximum. The following is the regex pattern for the top-level domain.

\.([a-zA-Z]{2,5})$

Now we put them all together:

^([a-zA-Z0-9_\-\.\+]+)@([a-zA-Z0-9_\-\.]+)\.([a-zA-Z]{2,5})$

Let’s test that regex against an email:

echo "[email protected]" | awk '/^([a-zA-Z0-9_\-\.\+]+)@([a-zA-Z0-9_\-\.]+)\.([a-zA-Z]{2,5})$/{print $0}'

echo "[email protected]" | awk '/^([a-zA-Z0-9_\-\.\+]+)@([a-zA-Z0-9_\-\.]+)\.([a-zA-Z]{2,5})$/{print $0}'

validate email

Awesome!! Works great.

This was just the beginning of regex world that never ends. I hope after this post you understand these ASCII pukes 🙂 and use it more professionally.

I hope you like the post.

Thank you.

0